“What’s this going to cost me?” is the first question every homeowner asks, and it should be. Metal siding isn’t the cheapest material on the shelf — but if you’re comparing it to vinyl or wood on sticker price alone, you’re missing half the math. Here’s what actually goes into a metal siding number in Colorado, explained the way we’d explain it standing in your driveway.
What Actually Drives the Price
No two metal siding jobs cost the same, because no two houses are the same. The line items that move your number the most:
- Panel material — steel typically runs less than aluminum, but both vary by gauge (thickness). Heavier-gauge panels cost more upfront and hold up better to hail.
- Profile — horizontal lap, vertical board-and-batten, and corrugated all price differently depending on the manufacturer and finish.
- New construction vs. re-siding — installing over an existing wall (with proper underlayment and moisture management) is usually less labor than a full tear-off.
- Home size and complexity — dormers, multiple gables, and steep-pitch sections all add labor time.
- Elevation and access — some of our mountain-community jobs need extra scaffolding or staging that a flat Colorado Springs lot wouldn’t.
- Underlayment and flashing — done right, this isn’t optional, and it’s part of what separates a siding job that lasts 40+ years from one that fails at year 12.
General Price Ranges (So You’re Not Walking In Blind)
These are ballpark, industry-general ranges for planning purposes — not a quote. Every home is different, and the only way to get a real number is a free, on-site estimate.
- New installation: typically runs higher per square foot than vinyl, reflecting material and labor, but with a 40–70 year lifespan versus 15–20 for vinyl in this climate
- Re-siding over existing walls: generally less than a full tear-off, project-dependent
- Repair work (hail dents, panel replacement, seam repair): priced by scope — a few damaged panels is a very different job than a full slope
We’d rather give you an honest range and a real number than a lowball estimate that changes once we’re on the roof.
Why Metal Siding Costs More Upfront — and Less Over Time
Vinyl and wood are cheaper to install. They’re also not built for 8,000+ feet. Vinyl cracks and warps in our freeze-thaw swings; wood needs repainting and staining every few years and is far more vulnerable to hail and moisture. Metal siding installed correctly can run 40 to 70 years with basically no repainting, minimal maintenance, and strong resistance to the hail that tears through this region every summer. Run the math over 20 years instead of year one, and metal siding is usually the cheaper material — not the more expensive one.
Get a Real Number for Your Woodland Park Home
We give straight, written estimates — no high-pressure sales pitch, no vague “call for pricing” runaround. Cory and the crew have been doing this at elevation for 20+ years, so when we walk your property, we already know what your specific roofline, exposure, and elevation mean for the job.
Frequently Asked Questions
Is metal siding more expensive than vinyl siding? Upfront, usually yes. Over the life of the material, often no — vinyl typically needs replacement within 15–20 years in Colorado’s climate, while properly installed metal siding can last 40–70 years.
Does the type of metal (steel vs. aluminum) change the price? Yes. Steel and aluminum price differently, and panel gauge (thickness) affects both cost and hail performance. We’ll walk you through the tradeoffs for your specific project.
Can I install metal siding over my existing siding to save money? Often, yes — re-siding over an existing structure with proper moisture management is a common, cost-effective approach. Whether it’s right for your home depends on the condition of what’s underneath, which we’ll assess during your free estimate.
Do you offer financing or payment plans for metal siding projects? Give us a call at 719-210-9235 to talk through your project and options — we’re happy to walk through what makes sense for your budget.
How do I get an accurate quote for my home? The only accurate number comes from a free, on-site estimate. Call 719-210-9235 or request one online, and we’ll give you a clear, written breakdown — no pressure, no surprises.
Get a real, honest number for your metal siding project — not a guess. Free on-site estimates for Woodland Park, Divide, Florissant, Colorado Springs, and the rest of our mountain service area.
? Call 719-210-9235 or request your free estimate online.
